Tesla Light Show Not Working : Possible Reasons

Some EV owners had claimed that their Tesla light show not working correctly. There are a few options if a Lighting Display is not functioning properly.

Tesla shocked its electric car family in 2021. This surprise was an over-the-air software update v11.0 to enhance enjoyment with one of the current Model S, X, Model 3, and Model Y functions.

Tesla continues to demonstrate why they’re unique and to provide EV enthusiasts with new things to enjoy.

Although it may be old news from some, consumers continue to appreciate Tesla’s and Elon Musk’s uniqueness among the major automakers.

Tesla Light Show Not Working

Using the car’s headlamps, rear lights, interior lights, and any additional lighting compatible with the function, qualifying electric cars can put on a unique Lighting Display set to music; this function can last up to 5 minutes.

Accessing it will tell you to park your car outside and watch the car’s custom lights. When you enable this function, it will question how loud you would like the music to be.

When you select the volume, a message will appear. The feature will begin after you exit the vehicle and close all the doors. This function will begin once you exit.

If your car’s Lighting Display is not working, you should check your car’s electrical connection.

tesla Light Show Not Working
Tesla Light Show Not Working

Tesla Light Show Not Working : Possible Reasons

The Tesla feature allows approved vehicles to present a Light Show by synchronizing their tail lights, headlights, dash lighting, and other lights to music.

If you own a Tesla, you should take advantage of this function.

If Light Display is not working, you have the following options:

  • Check to see if your car supports the flash feature function.
  • Experts have created a list of EV vehicles compatible with this feature.
  • You named the root folder incorrectly.
  • Check that it says “Light show” exactly.
  • Lightning feature files aren’t properly imported into the folder.
  • You must paste both files into the root folder with the relevant extensions.
  • Check that the flash drive is properly inserted into the Tesla’s front USB port.
  • Click Toybox on your Tesla’s screen, and ‘Custom Lights should appear.
  • If it only indicates ‘Light Show‘ it means your EV isn’t receiving files from your flash drive and is instead loading the default lightning display.
  • Wait for your EV to receive the data from your disk, and tap Toybox again.
  • Custom Lights program is open source, so anyone can use it to create a lightning feature.
  • Is the Light Display missing a few blinks?
  • The creator most likely did not design the lightning feature properly.
  • If you are using lightning in your Model X and it’s not opening the wing doors.
  • Files are likely intended for the Model S, 3, or Y.
  • If the popup name is “Light Show” rather than “Custom Light Show” the Flash drive formatting or needed folder and file requirements are incomplete.
  • If the essential files exist, but there is an issue with the lights display sequence file, it will display error warnings.
possible reasons for lightshow failures
Possible reasons for light show failures

How to Fix it

Restarting the system is likely to resolve the issue if you’re experiencing any bugs, malfunctions, or issues with your Tesla, such as error in lightning.

The update of Tesla upgrades one additional loaded feature and is compatible with the most recent Models S and X, as well as any Model 3 or Model Y.

And that’s not all—Elon musk has made it possible for anyone who has a computer to build their bespoke lights using the open-source programme xLights, which is available for free.

EV owners looking for fantastic lighting effects without the effort are in luck. You can load flashes of lightning shared by other creators into your Tesla.

  • You must first arrange a USB drive.
  • Because Tesla states that the drive cannot contain a base-level EV Cam folder, the simplest solution is to preserve your original dash-cam disc and utilize the other USB drive just for recording light displays.
  • On a Windows PC, reformat the USB drive as exFAT or FAT32 (MS-DOS FAT for Mac), and after that, create a root folder called Lights feature.
  • You might try installing a different lightning function, and if it doesn’t work, try something else.
  • Wait a few seconds after inserting the flash drive into any front USB, USB-C ports, or glovebox USB ports.
  • Select Light Show in the ToyBox and then hit Start to enable this feature.
  • If such files on the USB flash drive fit the criteria, you will use the custom show rather than the built-in show.
  • You can also solve this issue by making your light.
  • The software upgrade v11.0 is free and open-source.
  • Users can construct their personalized lightning by making minor adjustments to the file on a computer.
  • You must use a USB drive to upload the revised file version to a Tesla vehicle.
  • The Model 3 includes two USB ports in the centre console’s front compartment.
  • These ports are used for connecting and charging USB devices.
  • Open files from your phone or USB device when the flashings of your vehicle are enabled.
  • You can exit the car once the status changes to “lightning ready!” and the custom flashing will begin when you exit your vehicle.

The ideal method is to organize various files in their designated folders. When you want to change shows, delete the old sequence and audio files from your current folder and replace them with the new show’s folder or lightshow.mp3 files.

Unfortunately, you must accomplish this on a computer because the task cannot be achieved using the car’s interface.


The tailgate or trunk lid, charging port, windows, side mirrors, and falcon wing doors on Model X can operate throughout the lightning function, depending on whatever Tesla vehicle you own and the chosen sequence, so make sure you leave enough space around your vehicle before pressing Start.

The light display pattern includes directions for a moving portion, but if your EV lacks that feature, don’t worry—it will simply not move, but You will not disrupt the performance.

For example, older Model 3s lack a powered opening trunk so that the trunk remains still as the rest of the show continues. So Enjoy the new functionality.

2 thoughts on “Tesla Light Show Not Working : Possible Reasons”

  1. I have a Model 3 2018, I downloaded some light shows and loaded them on sd cards various sizes, only one show per card, The show comes on but the lights stop working about a min and half while the music continue’s to play. I’ve tried unplugging the dash cam, leaving my phone in the car with bluetooth connected, moved car from garage to outside, still stops at same time. The new Tesla lightshow from update works fine. Is my car too old to do these shows for very long? I’ve rebooted the display in the car. I’m also having and issue with my car automatically connecting the bluetooth to my phone. I made sure sentry mode was off. I have to manually connect the bluetooth on my phone everytime I enter my car. I’ve deleted my phone from the car and the car from my phone and reconnected them, but I’m still having this issue. Could this be the reason the custom light shows are not working any longer? Am I going to have to learn and make my own light shows, lol shorter versions? Any sugguestions? I will check back after Christmas. I couldn’t find a flash drive due to it being Christmas. Is that the problem? I ordered some, not due till end of year. I ordered 2.0 flash drives, is that enough, or should I get 3.0? I’m bumfusseled.

  2. I own a 2022 model 3. During the fist years lightshow Dec of 2021 the trunk opened at the cli a of the show. In the 2022 and now in the 2023
    shows the trunk clicks, but doesn’t open. Disappointing. Any ideas?

Leave a Comment

Your email address will not be published. Required fields are marked *